As per test results incorporated by, the battery in an Apple MacBook Pro PC endures five to six hours even with the Wi-Fi connector turned on and the processor running without holding anything back. 

This implies business people can be more useful for longer when out and about. By and by, you need to interface the AC power connector to incidentally charge the MacBook Pro. Like AC connectors for different workstations, the MagSafe connector utilized with the MacBook Pro permits you to utilize the scratchpad while charging the battery; it associates with any standard 110V or 220V plug. 

The MagSafe connector’s inventive plan assists with forestalling unplanned drops and weight on the charging attachment yet in addition makes interfacing the connector a piece not the same as ones intended for different workstations.

  1. Adjust the five pins on the more modest finish of the MagSafe AC power connector with the pinholes in the connector on the MacBook Pro. Hold the finish of the connector so it nearly contacts the pins in the connector on the PC yet doesn’t drive the connector into the attachment.
  2. Discharge the finish of the MagSafe AC power connector link and permit it to fit properly inside the attachment. The MagSafe connector has an attractive edge that interfaces and ties down to the pins inside the charging attachment. 

The attractive edge of the connector guarantees a dependable and secure association between the connector and the charging attachment while permitting the link end to detach effectively on the occasion somebody stumbles over the power string. Assuming somebody stumbles over the power line while the PC is charging, the connector end pulls from the MacBook Pro as opposed to maneuvering the scratchpad of the work area onto the floor.

  1. Plug the power rope that interfaces with the power converter block at the far edge of the AC connector link into an electrical attachment or plug extension. On the other hand, turn off the standard power rope from the power converter block and interface the more extended expansion link included with the MacBook Pro. After you interface the augmentation power line to the power converter block, plug the opposite finish of the rope into an electrical attachment.
  2. Pull the two white prongs situated on the back of the power converter block out until completely expanded. Envelop any abundance slack by the power string around the two white prongs.

To charge the battery in your Mac, associate the USB-C power connector to an electrical plug, then interface the USB-C to MagSafe 3 Cable to the power connector and the MagSafe 3 port on your MacBook Pro. As the connector draws near to the port, you’ll feel an attractive force attracting it. After you associate the charger, the marker light gleams green if your battery is completely energized. Assuming your battery is charging or charging is waiting, the marker light gleams golden.

MagSafe 2 and MagSafe power connectors aren’t viable with MagSafe 3.

Assuming the pointer light blazes

Assuming the marker light on the MagSafe 3 connector streaks golden over and over, attempt these means:

  • Separate the USB-C to MagSafe 3 Cable from your Mac and the power connector.
  • Separate the USB-C power connector from the divider outlet.
  • Utilize a dry fabric to wipe the MagSafe 3 port and MagSafe 3 connector. Ensure both the port and connector are dry and clear of any trash.
  • Ensure the USB-C port on the power connector and the USB-C connector are clear of any flotsam and jetsam.
  • Restart your Mac.

Interface the USB-C power connector to the divider outlet, associate the USB-C to MagSafe 3 Cable to the connector and your Mac, then, at that point, take a stab at charging once more.

If the pointer light keeps on glimmering over and again, contact Apple.

Utilize a USB-C charge link

You can utilize any of the Thunderbolt 4 (USB-C) ports to accuse your Mac of a USB-C charge link. Your Mac charges over just a single port at a time, so connecting different power connectors to the MagSafe 3 port and Thunderbolt 4 (USB-C) ports won’t result in quicker charging. If you associate more than one power source, your Mac charges just from the connector giving the most power.


All that matters is which MacBook you own. MacBook Pro chargers are too strong to even consider utilizing for your Beats Flex. The USB-C link will associate with your Beats Flex and even charge it unimaginably rapidly.

It might likewise cheat your Beats Flex battery and prompt it to overheat and extend. Sometimes, this can prompt a risky blast. A cheated battery might detonate even after it has been disengaged from the charger.

For the best charging experience, you ought to utilize the USB-C accuse link that happens to your Mac notepad. … USB-C links appraised for 29W or 30W will work with any USB-C power connector, yet will not give sufficient power when associated with a power connector that is more than 61W, like the 96W USB-C Power Adapter.